Go to Nuova Rade Site
Go to Marina del Sol Site
Go to Lofrans Site
Índice      Cart      Contact


Ventilation Blower

Jabsco DC Blowers are designed to remove fumes from the engine compartments
of gasoline powered boats prior to start-up,
and therefore conform to ISO 8846 MARINE and USCG Regulations for ignition protection.
They are listed as N.M.M.A. type accepted and comply with ISO 9097 MARINE and are CE marked.
AC models are not ignition protected. Jabsco Blowers can also be used for air intake or extraction in galleys,
bilges, accommodation and head compartments.
Only the heavy-duty blowers are designed for continuous duty operation in commercial or heavy use applications.
Blowers should not be installed close to sources of direct heat exceeding 180 Degrees Fahrenheit (55 Degrees Celsius)

Flangemount Blower

Flangemount Blowers are of a radial design, which gives the highest
output in more complex installations with longer ducting lengths and/or multiple bends in the ducting.
They are generally mounted directly onto a flat bulkhead using a mounting collar to connect to the discharge ducting.
This allows a very neat installation on an engine room bulk head.

 flangemount blower
Flangemount Blower
heavy duty flangemount blower
Heavy duty Flangemount Blower

Flexmount Blower

Flexmount Blowers are also of radial design, but are installed by attaching a mounting collar
(supplied with the blower) around the motor to any convenient solid surface.
They can be rotated inside the collar to allow the shortest ducting lengths and most convenient routings in confined spaces.
Both ports are designed for slip-on flexible ducting connections.


Flexmount Blower

Heavy Duty Flexmount Blower



Tel: (34) 952 802643

Email: mail@mds-nautica.com

Marina del Sol de Estepona SA

Plaza de Levante 35/37

Puerto Deportivo

Estepona 29680

Malaga España

Tel: (34) 952 802643

Email: mail@mds-nautica.com