Water Pressure System Accessories
Aqua Filta adsorbs dissolved impurities,
freshening and cleansing water to make it natural tasting,
sweet smelling and crystal clear. Screw on cartridge is replaced annually,
or sooner if necessary, at half the cost of replacement filters.
Over 200g of silver impregnated
Beneficial mineral salts are retained.
Ports accept fitting to either 1/2" (13mm) ID hose
or 1/2" (13mm) screw-in fittings for polybutylene or copper plumbing.
Initial flow capacity up to 3.7 GPM (14 LPM).
Tough molded components give ample pressure capability, up to 60 psi (4.2 bar).
| 1/2" (13mm) ID hose, 5/8"
Hep20 and Acorn fittings,
5/8" (15mm) John Guest speedfit
and Whale system 15 fittings,
and 1/2" (13mm) BSP female threaded fittings.
|91.03 €||59000-1000||Aqua Filta|
|53.69 €||59100-0000||Replacement Filter Cartridge|
Inlet strainer protects all electric diaphragm pumps.
Prevents unnecessary pump breakdowns caused by particles in the water.
Transparent housing allows instant inspection.
Quick, in-place cleaning of the 40# mesh stainless steel screen.
|3/8",1/2",3/4"(10mm,13mm,19mm) ID hose||12x7x6|
Water Pressure Regulators
Inlet water regulators are designed to protect your boat water system
plumbing and fixtures from the possible high pressure of municipal water systems.
Regulation is controlled at all flow rates by a pre-set spring, and a removable strainer traps debris.
Both in-line portable and permanent flush mount models
are available in our line of diaphragm sealed regulators
Limits inlet water pressure to 45 psi (3.1 bar).
Maintains regulated pressure at various flow rates.
Compact in-line model only 3" (77mm) long.
Flush model has unique swivel elbow output.
Manufactured of food-grade materials.
Meets all applicable codes and approvals.
Removable strainer on 44412 models protects plumbing.
|Flush connections for 3/4" (19mm)
GHT female inlet and 1/2" (13mm) 14 male pipe outlet.
In-line connections for 3/4" (19mm)
GHT female inlet and 3/4" (19mm) GHT male outlet.
Pressurized Accumulator Tanks
Improves all pressure controlled water systems.
Our new compact 21oz (0.6L) Accumulator Tank fits into
those tight areas and performs all of the same functions as our 1 Quart (1L) model,
but in a smaller package.
Smoother flow, quieter water systems.
Internal rubber membrane eliminates maintenance and allows universal mounting.
Better control of hot water temperatures.
Simply fitted to new or existing systems.
Longer pump life, lower battery drain.
Snap-in port fittings.
| 1/2" (13mm) ID hose,
optional ports available
|51.27 €||30573-0003||Pressurized 0.6L Accumulator Tank|
|154.64 €||30573-0000||Pressurized 1L Accumulator Tank|
|7.80 €||30649-1000||Snap-In Port Fittings for
1/2" (13mm) female threads
Larger Pressurized Accumulator Tanks
Smooth flow from faucets and showers, reduce pump
cycling, eliminate pulsations and water hammer.
Can be mounted vertically or horizontally.
Water is totally separated from air chamber by a rubber bladder.
All models include mounting brackets 18810-0000 (US supply).
2 gallon tank NSF-61 listed
|Shut-off Pressure||Fitting||Size (cm)||Weight|
|100 psi (6.9 bar) maximum working pressure,
pre-pressurized to 20 psi (1.4 bar)
|3/4" (19mm) NPT male thread|| 18810-0000:
|18810-0000: 2.5kg 23240-2000: 3.75kg|
|214.69 €||23240-2000||8L Tank|